Print This Page
MOGAMI MIDI SYNCHRO CABLE ASSEMBLIES are specially designed for use with the Musical Instrument Digital Interface (MIDI) communication system. Applications include the latest MIDI patchbays, and interconnection between MIDI equipment and MIDI served musical instruments. These outstanding professional cables offer the following features:
Back To Top
Back To Top
SPECIFICATIONS
Back To Top
ELECTRICAL & MECHANICAL CHARACTERISTICS
* Using standard testing method of Mogami Wire & Cable Corp.
Back To Top
WIRING DIAGRAM:
The MIDI signal is transmitted via a twisted pair (black and white) and wired to pins 4 & 5.
Back To Top
MIDI Synchro Cable Assemblies
MOGAMI MIDI SYNCHRO CABLE ASSEMBLIES are specially designed for use with the Musical Instrument Digital Interface (MIDI) communication system. Applications include the latest MIDI patchbays, and interconnection between MIDI equipment and MIDI served musical instruments. These outstanding professional cables offer the following features:
- SINGLE and DUAL MIDI CABLES are both available from standard stock. NEW DUAL MIDI CABLES are designed for compact wiring and prevent connection errors when using both Midi-Out and Midi-In ports simultaneously.
- One piece molded 5pin Din connectors.
- Low profile two stage molding for easy handling, reliability and long life.
- 0.76µ gold plated pin version available to order.
- Specially designed, superflexible cable with four #25AWG copper conductors and served (spiral) shield.
- Attractive, durable, satin black rubber like PVC jacket.
- Fast, accurate transmission of MIDI signal via a twisted pair for better electromagnetic noise rejection.
- Additional two pins wired for tape synchro signal.
- Interchangeable colour rings for easy patch cord identification.
- Bulk cable also available in 50m (164Ft), 100m (328Ft) rolls and 200m (656Ft) spools.
Back To Top
| Single Cable | Part No. W2948 |
| Dual Cable | Part No. W3033 |
| Part No. | Single | MIDI-015 | MIDI-03 | MIDI-05 | MIDI-10 | MIDI-15 | MIDI-20 | MIDI-30 |
| Dual | MIDI-015D | MIDI-03D | MIDI-05D | MIDI-10D | MIDI-15D | MIDI-20D | MIDI-30D | |
| Length | 18"(1.5') 45cm |
3Ft 90cm |
5Ft 1.5m |
10Ft 3m |
15Ft 4.5m |
20Ft 6.1m |
30Ft 9.1m |
|
Back To Top
SPECIFICATIONS
| Configuration |
 |
 |
| Cable Part No. | W2948 | W3033 |
| Conductor | 30/0.08A (30×#40) 0.15mm² (#26AWG) | |
| Insulation | 1.2Ø (0.047"Ø) PVC (BLACK/WHITE/RED/GREEN) | |
| Shield | 98/0.12A (98×#37) Served Shield | |
| Jacket | 5.0Ø (0.197"Ø) Flexible PVC (BLACK) | |
| Weight | 8.6kg/200m | 15kg/200m |
| PLUG | |
| Pins | 0.76µ gold or silver plated brass |
| Shield | Nickel Plated Brass |
| Insulation | Polyacetal Resin |
| Molding | Flexible PVC (Two Stage Molding) (BLACK) |
Back To Top
ELECTRICAL & MECHANICAL CHARACTERISTICS
| DC Resistance (20°C) | Inner Cond.: 0.12Ω/m(0.037Ω/Ft) Shield: 0.02Ω/m(0.006Ω/Ft) |
| Capacitance (1kHz, 20°C) | Between Twisted Pair: 99 pF/m (30 pF/Ft) Between Shield and one of Twisted Pair: 182 pF/m (56 pF/Ft) Between Shield and Synchro Conductor: 180 pF/m (55 pF/Ft) Between One of Twisted Pair and Synchro Conductor: 91 pF/m (28 pF/Ft) |
| Pitch of Twisted Pair | Approx. 30mm (1.18") |
| Electromagnetic Noise* | 0.02‾0.06mV |
| Voltage Breakdown | Must withstand at DC 500V/15sec. |
| Insulation Resistance (DC 125V, 20°C) |
10000 MΩ × m Min. |
| Tensile Strength (At Cable-Connector Joint) |
480 N Min. |
| Flex Life* : At the connector strain relief : Cable itself (200gr, Bend radius of the cable stopper : 12.7mm) |
45,000 Cycles 6,700 Cycles |
| Emigration | Non-emigrant to ABS resin |
Back To Top
The MIDI signal is transmitted via a twisted pair (black and white) and wired to pins 4 & 5.
| NOTE: | Transmission lag in MIDI systems is mainly caused by the speed of the photocoupler and the rise time of the driver rather than the transmission characteristics of the cable. |
