Stereo Microphone Cable / Aerial Microphone Cable
#24AWG Stereo Microphone Cable
W3106
Stereo microphone cable comprised of larger and mechanically stronger cores for those who need stereo wiring at stage recording etc. to get rid of tangling problems. OD of each channel is 4.8mm (0.189") to relieve any anxiety about mechanical strength of separated cores connected to each XLR 3P audio connectors when compared with regular 2-core snake cable. This design of OFC conductor and low capacitance as regular size microphone cable assures the same reliable sound quality as MOGAMI #2549 mic cable level.
W3177 (Monaural)
W3178 (Stereo)
These cables are designed for suspension microphones reinforced by one stainless steel wire rope of 830 N (187 pounds) breakable weight for monaural type (Part No. W3177) and two same size ropes for stereo type (Part No. W3178). Although the sound quality is compromised a little (especially at high frequency range), they are all designed with quad (shielded four conductor) configuration for wider applications (to provide stronger electromagnetic noise cancellation).
Back To Top
SPECIFICATIONS
| Configuration |  |
 |
 |
|
| Part No. | W3106 | W3177 | W3178 | |
| No. of Cores | 2 | 1 | 2 | |
| No. of Conductor | 2 | 4 | 4 | |
| Conductor | Details | 20/0.12 OFC | 20/0.12 OFC | 30/0.08 OFC |
| Size(mm²) | 0.226mm² (#24AWG) | 0.226mm² (#24AWG) | 0.15mm² (#26AWG) | |
| Insulation | Ov. Dia.(mm) | 1.6Ø (0.063") | 1.6Ø (0.063") | 0.9Ø (0.0354") |
| Material | XLPE (Cross-Linked Polyethylene) | LNXLPE(Low Noize Cross-Linked Polyethylene) | ||
| Colors | Blue / Clear | Blue / White (Quad) | ||
| Reinforcement | Material | - | Stainless Steel Wire Rope | |
| Details | 7/7/0.11 | |||
| Numbers of Rope | 1 | 2 | ||
| Breakable Weight | 830 N (187pound) | 1,660 N (374pound) | ||
| Monofilament | Ov. Dia.(mm) | 1.1Ø (0.043") | - | - |
| Material | XLPE (Cross-Linked Polyethylene) | |||
| Filler Thread | - | Cotton | Aramid | |
| Binder | Thickness | - | 0.025mm (0.00098") | - |
| Material | Paper Tape | |||
| Served Shield | Approx. 80/0.12A | Approx. 115/0.12A | Approx. 68/0.10A | |
| Core Jacket | Ov. Dia.(mm) | - | - | 2.8Ø (0.110") |
| Material | PVC | |||
| Colors | Red / White | |||
| Filler Thread | - | - | Polypropylene | |
| Binder | Thickness | - | - | 0.025mm (0.00098") |
| Material | Paper Tape | |||
| Ov. Jacket | Ov. Dia.(mm) | 2×4.8Ø (2×0.189") | 6.8Ø (0.268") | 7.4Ø (0.291") |
| Material | PVC | PVC+Polyurethane Compound | ||
| Color | Black | |||
| Roll Sizes | 50m (164 Ft) 100m (328Ft) 200m (656Ft) |
200m (656Ft) | 200m (656Ft) | |
| Weight | 5.7kg/100m | 12.2kg/200m | 13.3kg/200m | |
Back To Top
ELECTRICAL & MECHANICAL CHARACTERISTICS
| Part No. | W3106 | W3177 | W3178 | ||
| DC Resistance at 20°C | Inner Cond. | 0.083Ω/m(0.0253Ω/Ft) | 0.090Ω/m(0.027Ω/Ft) | 0.13Ω/m(0.0397Ω/Ft) | |
| Shield | 0.021Ω/m(0.0064Ω/Ft) | 0.015Ω/m(0.0046Ω/Ft) | 0.035Ω/m(0.011Ω/Ft) | ||
| Capacitance at 1kHz, 20°C (Partial C. Value) See below figure* |
K0 (Shield-Conductor) | 77pF/m(23.5pF/Ft) | 108pF/m(32.9pF/Ft) | 83pF/m(25.3pF/Ft) | |
| K1 (between neighbour conductors) | 10pF/m(3.1pF/Ft) | 8pF/m(2.44pF/Ft) | 18pF/m(5.49pF/Ft) | ||
| K2 | - | 3pF/m(2.44pF/Ft) | 3pF/m(2.44pF/Ft) | ||
| Balanced Quad Connection | Cond-Cond | - | 107pF/m(32.6pF/Ft) | 160pF/m(48.8pF/Ft) | |
| Cond-Shield | - | 190pF/m(58.0pF/Ft) | 222pF/m(67.7pF/Ft) | ||
| Inductance | 0.9µH/m(0.27µH/Ft) | 0.5µH/m(0.15µH/Ft) | 0.2µH/m(0.061µH/Ft) | ||
| Electrostatic Noise** | 5mV Max. | 20mV Max. | 5mV Max. | ||
| Electromagnetic Noise at 10kHz** | 0.5mV Max. | 0.013mV Max. | 0.06mV Max. | ||
| Microphonics | 10mV Max. | 5mV Max. | 10mV Max. | ||
| Voltage Breakdown | Must withstand at DC 500V/15sec. | ||||
| Insulation Resistance | 100000 MΩ × m Min. at DC 125V, 20°C | ||||
| Flex Life** | 100,000 cycles | 36,100 cycles | 59,000 cycles | ||
| Tensile Strength | 382N (per pair) | Over 980N | |||
| Emigration | Non-emigrant to ABS resin | ||||
| Applicable Temperature | -20°C‾ +70°C(-4°F‾ +158°F) | ||||
| Standard | UL 20002 AWM 30V 60°C VW-1 | - | - | ||
| ** Using standard testing methods of Mogami Wire & Cable Corp. | * Partial Capacitance | |
 |
 |
|
