Unbalanced Microphone Cables
Economical Superflexible Unbalanced Mic Cables
These cables show Mogami's manufacturing and cable design expertise in creating an economical unbalanced cables which maintain necessary mechanical strength (tensile strength and long flex life) and flexibility for a microphone cable. Two overall diameter sizes are available with exactly the same construction.
W2333

Part No. | W2330 | W2333 |
Ov. Dia.(mm) | 3.0Ø (0.118") | 4.0Ø (0.157") |
Flex Life | 15,500 cycles | 16,500 cycles |
Tensile Strength | 274 N | 284 N |
Color | Black | Black |
Note: | For the very highest quality recording applications, Mogami original high-end Neglex audio cable Part No. W2803 or Part No. W2497 constructed with patented Double - Cylindrical structure should be used. |
Designed for excellent sound in a compact unbalanced cable. Special fillers inside the conductor yield mechanical strength that is much higher than any comparable diameter cable without any special contrivance. Part No. W2368 cable has the same structure as Part No. W2697 cable except for an unbalanced configuration.
Back To Top
W2368

Note: | Any specific countermeasure against microphonics ( noise ) for high impedance microphones is not taken for this cable. |
SPECIFICATIONS
Configuration | ![]() |
![]() |
![]() |
|
Part No. | W2330 | W2333 | W2368 | |
No. of Conductor | 1 | |||
Conductor | Details | 16/0.08 A <T1000D*1> | ||
Size(mm²) | 0.08mm² (#28 AWG) | |||
Insulation | Ov. Dia.(mm) | 1.5Ø (0.059") | 1.0Ø (0.039") | |
Material | LNXLPE (Low Noise Cross - Linked polyethylene) | PVC | ||
Colors | Clear | White | ||
Served Shield | Approx. 36/0.12A | Approx. 38/6/0.08A | ||
Jacket | Ov. Dia.(mm) | 3.0Ø (0.118") | 4.0Ø (0.157") | 2.0Ø (0.079") |
Material | Flexible PVC | |||
Color | Black | |||
Roll Sizes | 100m (328Ft) 200m (656Ft) |
200m (656Ft) (standard) |
100m (328Ft) 200m (656Ft) |
|
Weight per 200m Roll | 2.5kg | 4.2kg | 1.5kg |
Back To Top
ELECTRICAL & MECHANICAL CHARACTERISTICS
Part No. | W2330 | W2333 | W2368 | |
DC Resistance at 20°C | Inner Cond. | 0.23Ω/m(0.070Ω/Ft) | ||
Shield | 0.05Ω/m(0.015Ω/Ft) | 0.10Ω/m(0.031Ω/Ft) | ||
Capacitance at 1kHz, 20°C (Partial C. Value) See below figure* |
K0 | 115pF/m(35pF/Ft) | 350pF/m(107pF/Ft) | |
Inductance between conductors at 1kHz. 20°C | 0.3µH/m(0.092µH/Ft) | |||
Electrostatic Noise** | 50mV Max. | |||
Electromagnetic Noise** | 0.05mV Max. | 0.05mV Max. | ||
Microphonics at 50KΩ Load** | 300mV Max. | 1V Max. | ||
Voltage Breakdown | Must withstand at DC 500V/15sec. | |||
Insulation Resistance | 100000 MΩ × m Min. at DC 125V, 20°C | |||
Flex Life** | 15,500 cycles | 16,500 cycles | 43,000 cycles | |
Tensile Strength | 274N | 284N | 206N | |
Emigration | Non-emigrant to ABS | |||
Applicable Temperature | -20°C‾ +70°C(-4°F‾ +158°F) |
** Using standard testing methods of Mogami Wire & Cable Corp. | * Partial Capacitance![]() |
SPECIFICATIONS
ELECTRICAL & MECHANICAL CHARACTERISTICS
Part No. | W2314 | |||
DC Resistance at 20°C | Inner Cond. | 0.13Ω/m TYP. | ||
Shield | 0.045Ω/m TYP. | |||
Capacitance at 1kHz, 20°C (Partial C. Value) See below figure* |
K0 | 110pF/m TYP. | ||
Inductance between conductors at 1kHz. 20°C | 0.3µH/m TYP. | |||
Electrostatic Noise** | 50mV Max. | |||
Electromagnetic Noise** | LOD (Limit of Detection) | |||
Microphonics at 50KΩ Load** | 30mV Max. | |||
Insulation Resistance | 10^5MΩ. m Min. at DC 125V, 20°C | |||
Flex Life** | 18,200 cycles | |||
Tensile Strength | 260N | |||
Emigration | Non-emigrant to ABS resin | |||
Applicable Temperature | -20°C‾ +70°C(-4°F‾ +158°F) |