|
Mogami multicore cables are designed for the highest level of audio
performance and feature superb electrical and mechanical characteristics
while remaining compact, superflexible and easy to use.
- Individually twisted shielded pairs, 2 channels
- XLPE (Cross Linked Polyethylene) insulation provides superb electrical
characteristics and will not melt or shrink back during soldering.
- Rugged and flexible construction that is easy to handle, even at temperatures
down to -20°C (-4°F).
- Each channel has a drain wire and served (spiral) bare copper shield.
The drain wire simplify termination and can be crimped by the same size
contact as the inner conductor pair.
STANDARD VERSION
| Part No. |
No. of Channels |
Ov. Dia. (Approx. mm) |
Jacket Thickness (Approx. mm) |
Weight (kg/100m)(kg/328Ft) |
Maximum Length available |
| W2930 |
2-ch |
7.5(0.295") |
1.0(0.039") |
7 |
500ft. |
Back To Top
CABLE CORE SPECIFICATIONS
| Conductor |
30/0.08A (0.15mm²) #26AWG
(30×#40AWG) |
| Insulation |
1.0Ø XLPE (Cross Linked Polyethylene) (0.039") |
| Drain Wire |
7/0.18TA (0.18mm²) #25AWG
(7×#33AWG) |
| Served Shield |
Approx. 58/0.10A Served (spiral) Shield |
| Jacket (Covering) |
2.8Ø Flexible PVC
(0.110") |
| Identification |
See core number identification table |
|
Figure (1) |
ELECTRICAL & MECHANICAL CHARACTERISTICS
| DC Resistance at 20°C |
Inner Pair Conductor |
0.13Ω/m(0.040Ω/Ft) |
| Shield |
0.031Ω/m(0.0095Ω/Ft) |
| Capacitance at 1kHz, 20°C
(Partial Capacitance Value) See Figure (1) |
K0 |
130pF/m(40pF/Ft) |
| K1 |
12pF/m(3.7pF/Ft) |
| Inductance |
0.6µH/m(0.18µH/Ft) |
| Electrostatic Noise (Hum Pick-up)* |
2.5mV Max. |
Electromagnetic Noise at 10kHz*
(Inductance of the toroidal core: 595µH) |
0.1mV Max. |
Microphonics*
Method: Stepping on cable |
50mV Max. at 50kΩ/ Load |
| Voltage Breakdown |
Must withstand at DC 500V/15sec. |
| Insulation Resistance at DC
125V, 20°C |
100000 MΩ/ × m Minimum |
| Tensile Strength of one pair
(26°C, 65% RH) |
274N |
| Emigration |
Non-emigrant to ABS resin |
| Applicable Temperature |
-20°C‾ +70°C(-4°F‾ +158°F) |
| Standard |
UL13 CL2X 60°C / UL 20002 AWM 30V 60°C VW-1 |
* Using standard testing methods of Mogami Wire & Cable Corp.
|
